Teknodrom Software

Offline programming

JobEditor
To create/edit robot jobs offline on a PC in INFORM language. This software does not handle communication with the robot.
JobEdit (43kB)

LadderEditor
is a PC-software for creating and editing internal PLC-job in the XRC system grapically. (Ladder Editor does not include any file transfer functions. Supplementary software needed.)
LadderE (48kB)

MotoSim
The MotoSim EG software is an off-line teaching system with 3D simulation for MOTOMAN industrial robots. It reduces teaching time that requires an actual robot, supports improvement of productivity and ensures operator's safety by enabling robot teaching on a personal computer. (MotoSIM EG does not include any file transfer functions. Supplementary software needed.)
MotoSim (171kB)

Rotsy-Pal
To create/edit palletising jobs offline. The result is shown as a real time simulation with ROTSY (included). Can be connected to both ERC and MRC controllers. (ROTSY-PAL does not include any file transfer functions. Supplementary software needed.)

MotoPBM
Offline programming of robot jobs for press-brake cells. Simulation in MotoSim (included). Workpiece drawings imported as 2D Cad-files. Communication with the robot by serial connection or via Ethernet.
MotoPBM (203 kB)

CIO-Editor
CIO-Editor is a PC-software for creating and editing internal PLC-job in the MRC system grapically. (CIO-Editor does not include any file transfer functions. Supplementary software needed.)

Communication Software

FDDWIN
Software designed for administration of robot jobs from a PC. One way communication from ERC, MRC or XRC controllers is possible. FDDWIN32 replaces the floppy disk drive unit. The PC hard disk is used as storage for robot jobs. FDDWIN32 is operated from the robot controller. FDDWIN32 is a Multi Language version in which 10 European menu languages plus Japanese are included. A network version is also available.
FDDWIN32 (44kB)
NetFDD (45kB)

JobExchanger
JobExchanger32 is a PC software designed for administration of robot jobs. One way communication from PC to ERC, MRC or XRC controller is possible (PC as host). The PC hard disk is used as storage for robot jobs. JobExchanger32 is operated from the PC. JobExchanger32 is a Multi Language version..
Jobexch (46kB)

MotoCom DLL
A software developer's tool which can be used for communication in software created with Visual Basic or C++.

MotoBup
Performs manual or scheduled backup of one or several robots. Controlled from the computer. Communication between PC and controller via serial connection or Ethernet. Scheduled backup is set individual for each connected robot, type of file can be selected. Two levels of access to reload old backups can be set. Multi Language version.
MotoBUP (44kB)

MotoDDE
A Dynamic Data Exchange software which acts like an interpretor between standard application programs and the controller. Can communicate with InTouch, FactoryLink, Citect, Fix etc.

ModoDCI
To save/load robot jobs to one robot at a time via a PC. The software executes the commands sent from the controller when in PLAY-mode.

Utilities Software

MotoCalV
To calibrate robot, tools and offline system.